Advertising word laser cutting machine installation process considerations?

1. Before operating the equipment, the user must carefully read this manual and related operation manuals, strictly abide by the operating procedures, and non-professionals are not allowed to turn on the equipment.

2. This equipment uses four types of lasers (strong laser radiation), which may cause the following accidents:

1 ignite the surrounding flammable materials;

2 During laser processing, other radiation and toxic and harmful gases may be generated due to different processing objects; 3 direct irradiation of laser radiation may cause human injury. Therefore, the equipment should be equipped with fire-fighting equipment. It is strictly forbidden to stack flammable and explosive materials around the workbench and equipment. At the same time, it must be kept well ventilated. Non-professional operators are prohibited from accessing the equipment.

3. The processing objects and emissions should meet the requirements of local laws and regulations.

4, laser processing may be risky, users should carefully consider whether the object being processed is suitable for laser operations.

5. There is high voltage or other potential danger inside the laser equipment. It is strictly forbidden for non-manufacturers to disassemble.

6. When the equipment is turned on, it must be guarded by a special person. It is strictly forbidden to leave without permission. All power must be turned off before personnel leave.

7. Never open any end caps while the equipment is in operation.

8. The engraving machine and other related equipment must be grounded safely before starting operation.

9. It is strictly forbidden to place any irrelevant total reflection or diffuse reflection objects in the equipment to prevent the laser from being reflected on the human body or flammable items.

10. During the working process of the equipment, the operator must observe the working condition of the equipment at any time. If abnormal conditions occur, the power supply should be cut off immediately and the corresponding measures should be taken actively.

11. The environment where the equipment is located should be dry, free of pollution, vibration, strong electricity, strong magnetic interference and other influences. Working environment temperature 5-40 ° C, working environment humidity 5-95% (no condensation).

12. The equipment should be kept away from electrical equipment that is sensitive to electromagnetic interference and may cause electromagnetic interference.

13. Equipment working voltage: AC220V, 50Hz; total power <1250W. When the grid voltage is unstable or does not match, it is strictly prohibited to turn on the power.

Advertising word laser cutting machine installation process? Advertising word laser cutting machine installation process The general process is as follows: install laser tube, install laser power, install water pump, install air compressor, adjust light path, install fan, safety ground. Fourth, the blast hole is not complete. The popular saying is that the hole is cut out without punching.