The previous article introduced the woodworking engraving machine in detail, then this article will continue to introduce the correct use of woodworking engraving machine tools to extend the service life of wood engraving machine. Below, the article will discuss the correct use of woodworking engraving machine tools from the aspects of jacket size, tool holder, processing thickness and material.
Woodworking machine cutter
1. The woodworking engraving machine tool holder has good contact with the jacket; the jacket should be firmly clamped to the holder. If the jacket is used for a long time, the inner hole is deformed, and the jacket must be replaced immediately.
2, select the appropriate woodworking engraving machine tool jacket size; can not choose a cross-section, not round, wear, the inner hole has a tapered tool holder, otherwise it will cause the handle to vibrate, the engraving does not achieve the desired effect.
3. When using the woodworking engraving machine, the thickness of the machining should not exceed the thickness that the cutting edge can cut, otherwise the broken knife will appear.
4. Always check the toughness of the woodworking engraving machine tool; if it is blunt, please replace it immediately to avoid the occurrence of broken knife.
5. For cutting of different materials, the cutting speed should be adjusted reasonably. The recommended speed of cutting should be balanced, and the speed should be kept as consistent as possible to achieve better results. If the cutting is too long, it should not stay, and it should be done in one go.
6, the tool should use a special cleaning agent to remove dirt, butter can prevent the tool from rusting. The tool cannot be polished or changed in shape.
Only by mastering the correct use of woodworking engraving machine tools can the woodworking engraving machine shine more and prolong the life of the woodworking engraving machine tool.
