The reason why the engraving machine lettering is not smooth

The effect engraved by the engraving machine does not necessarily meet the requirements of the customer 100%, especially if the engraved effect is not smooth enough, it is necessary to find out the reason and deal with it in time. However, when we are actually working, if this happens, it is mainly the reason for these two aspects: the engraving machine manufacturer
1. The gap between the y-axis or the x-axis of the engraving machine may also have a gap between the two axes at the same time, which causes the sway during the engraving process to cause the engraving path to be deviated and the lettering is not smooth;
Second, the linear speed of the engraving machine and the curve speed are too different, causing the engraving machine to vibrate too much when the curve is taken, so that the engraving path is deviated and the lettering is not smooth. How to solve it accordingly?
The first reason is that if the engraving machine is a round rail, it is necessary to change the rail or the slider, the action will be relatively large, depending on the reason. If it is a square rail, it is much simpler. Just adjust the up and down or front and rear sliders;
If it is the second reason, change the speed of the line or curve, and change the value to determine the parameters of the engraving machine itself.

Causes and judgments of tool wear in woodworking engraving machine

The discrimination of whether the tool of woodworking engraving machine can wear:
1, the tool can wear, the amount of wear, the most direct way to distinguish is to listen to the sound, if the cutting sound is very heavy or screaming, to clarify the tool's processing state is not normal, then you can stop the analysis, if you remove the tool Self-quality problems, tool clamping problems, and knife parameter problems. At this time, it should be able to determine that the tool is worn out, the demand is suspended, and the tool is changed.
2. After the machining state of the machine tool is used to determine the wear condition of the tool, if the machining parameters and cutting amount are set properly, the machine tool vibration during machining is very large, and “WONWON” is issued. At this time, it can be confirmed that the tool has reached a sharp wear state. Need to change the tool.