TIMKEN has recently developed a new type of lubricant. In some applications, it is not possible to replenish the lubricant due to inaccessibility, or the operating environment requires very good antifouling properties. This new type of lubricant is ideal for these special situations. This solid lubricant (Solidoil) can be fully filled into the inner space of the TIMKEN bearing, enclosing the cage and rolling elements, which not only has no effect on the operation and operation of the TIMKEN bearing, but also greatly extends the service life of the TIMKEN bearing. .
The polymer material is a structure with numerous micropores that can hold up to 4 times more lubricant than usual. As the inner surface moves, the lubrication is slowly released, which ensures a balanced and consistent lubrication of each TIMKEN bearing.
The oil-filled polymer material is molded into the TIMKEN bearing. During the molding process, a very narrow gap is formed around the rolling elements and the raceway, allowing the TIMKEN bearing components to rotate freely. The oil that penetrates the gap provides good lubrication to the bearing from the beginning. This lubricant offers a number of advantages over conventional construction.
It is especially worth mentioning that, at any operating temperature, it ensures that the lubricant is evenly distributed on the surface of the TIMKEN bearing.
TIMKEN bearings are often used, oil can reduce the service life of the bearings, then how do we remove the oil on the TIMKEN bearings? The following teaches you how to easily remove the oil on the TIMKEN bearing.
Bearings hardened by soft dry oil or rust-proof paste should be immersed in hot oil of 100 ° C ~ 200 ° C, clamp the bearing with pliers, and brush the oil on the bearing with a brush. The soft dry oil or anti-rust paste is melted when heated to 100 ° C ~ 200 ° C, and is easily washed out from the gap of the bearing. Sometimes the bearing is shaken several times in the oil. Oil will also flow away from the gap.
When cleaning the radial spherical bearing of the TIMKEN bearing, the ball, the bead frame and the inner ring should be laterally turned out from the outer ring and then immersed in the hot oil. When the short cylindrical roller bearing is cleaned, the roller and the bead frame should also be cleaned. The inner ring and the outer ring are disengaged.
When hot oil is cleaned, the temperature of the oil should not exceed 20 °C.
For more information and purchase please visit: https://www.supplyforever.com
